Table of Contents
Advertisement
Intel® Server System M50CYP2UR Family System Integration and Service Guide
Figure 60. OCP* Adapter Bay Filler Removal
To remove the filler:
1. Loosen the thumb screw on the right side of the filler (see Letter A).
2. Pull out the right side of the filler first and move the filler slightly to the right, ensuring the left end of the
filler is out of the slot.
3. Pull the filler away from the system (see Letter B).
Figure 61. OCP* Adapter Bay Filler Installation
To install the filler:
1. Insert the left side of the filler on the slot first.
2. Push the filler until the mounting screw goes into the mounting hole on the right side (see Letter A).
3. Tighten the thumb screw (see Letter B).
58
Advertisement
Table of Contents
