Chassis Component Identification; System Cover Removal / Installation; System Cover Removal; Figure 1. Chassis Component Identification - Intel M50CYP2UR Series System Integration And Service Manual

Intel® Server System M50CYP2UR Family System Integration and Service Guide
2.1

Chassis Component Identification

The following figure identifies the chassis components.
2.2

System Cover Removal / Installation

The system top cover consists of two panels – one over the front half of the system and one over the back
half of the system. To maintain system thermals, both top cover panels must always be in place when the
system is operational.
Required Tools and Supplies
• Anti-static wrist strap and conductive workbench pad (recommended)
• Phillips* head screwdriver #1
2.2.1

System Cover Removal

Removal of both top cover panels is necessary when installing or replacing any system component within the
server chassis. Before removing the top cover, power down the system and unplug all peripheral devices and
the power cable(s).
20

Figure 1. Chassis Component Identification