Figure 42. Pcie* Add-In Card Installation For Riser Card On Riser Slot #2 - Intel M50CYP2UR Series System Integration And Service Manual

Intel® Server System M50CYP2UR Family System Integration and Service Guide

Figure 42. PCIe* add-in Card Installation for Riser Card on Riser Slot #2

1. If the riser card assembly (bracket and board) is still inside the system, remove it from the system
following instructions in
2. Remove the fastener screw (see Letter A) and remove the filler panel from the add-in card slot (see Letter
B).
3. Insert the add-in card until it is fully seated inside the PCIe* slot on the riser card (see Letter C).
4. Using the fastener screws, secure the add-in card to the riser card bracket. Tighten to 5 in-lb.
Note: For add-in cards with internal cable connectors, it may be necessary to connect cables before installing
the riser card assembly into the system.
Section 3.3.1.
47