Intel® Server System M50CYP2UR Family System Integration and Service Guide
1. Insert the latch in the opening on the plastic case (see Letter A).
2. Lift the latch holder slightly up (see Letter B) and insert the notch into opening until it clicks (see Letter C).
3. Bring the latch down until it is aligned vertically (see Letter D).
4.
Insert the super cap capacitor inside the plastic case with the cable protruding out.
Choose the opening in the plastic case for the cable closest to the RAID module where the cable is going
to be connected.
Figure 89. Installing Latch on the Plastic Case
Figure 90. Insert Super Cap Battery
79