Ocp* Adapter With Ejector Latch Installation; Ocp* Adapter With Ejector Latch Removal; Figure 64. Ocp* Adapter With Ejector Latch Installation; Figure 65. Ocp* Adapter With Ejector Latch Removal - Intel M50CYP2UR Series System Integration And Service Manual

Intel® Server System M50CYP2UR Family System Integration and Service Guide
3.5.4

OCP* Adapter with Ejector Latch Installation

1. Ensure the latch is in the open position.
2. Push the OCP* adapter forward until the right side of the latch contacts the rear panel (see Letter A).
3. Rotate the latch towards the inside to get the OCP* adapter engaged with the connectors and close the
latch (see Letter B).
3.5.5

OCP* Adapter with Ejector Latch Removal

1. Push the latch on the left side of the OCP* adapter (see Letter A) and pull the latch out (see Letter B).
2. Using the latch, pull the adapter out of the system (see Letter C).
60

Figure 64. OCP* adapter with Ejector Latch Installation

Figure 65. OCP* Adapter with Ejector Latch Removal