Intel® Server System M50CYP2UR Family System Integration and Service Guide
2.5" Drive Bays
The following figure identifies the 2.5" drive bay components.
Note: To ensure proper system airflow requirements, all front drive bays must be populated with either a
drive or supplied drive blank.
Note: The 2.5" drive rails in the system are not removable. They slide out so that the storage drives can be
installed or removed in/from them. When sliding out a drive mounting rail from the system, only pull it as
much as it allows without forcing it.
3.5" Drive Bays
The following figure identifies the 3.5" drive bay components.
Note: To ensure proper system airflow requirements, all front drive bays must be populated with a drive
carrier. Drive carriers must be populated with either a drive or supplied drive blank.
Note: The 3.5" drive carrier must be completely removed from the chassis to install a drive into the drive
carrier.
Figure 140. 2.5" Drive Bay Components
Figure 141. 3.5" Drive Bay Components
109