Removing Intel
1. Remove the three screws as shown (see letter "A").
2. Remove the module out of the server system (see letter "B").
3. Install the I/O expansion module filler panel into the system back panel.
Installing and Removing the Intel
Key
Installing the Intel
Locate the white 4-pin key header next to Riser Slot 1. Carefully pickup the Intel
Upgrade Key. Match the Key and connector orientation and press down to install.
Removing the Intel
Pull up the key to remove it from the mother board.
®®
Intel
Server System R1000GZ/GL Service Guide
®
I/O Expansion Module
Figure 54. Removing an I/O Expansion Module
®
RAID C600 Upgrade Key
Figure 55. Installing the Intel
®
RAID C600 Upgrade Key
Hardware Installations and Upgrades
®
RAID C600 Upgrade
®
RAID C600 Upgrade Key
®
RAID C600
33