Intel® Server System M70KLP Family Technical Product Specification
Figure 32. OCP* 3.0 Add-in Card Bay
The OCP card is NOT hot swappable. The system must be powered off and disconnected from AC power to
install or remove the card.
Note: The system includes an OCP Hot Plug button located next to the OCP Card bay on the system back-
panel. The functionality of this OCP Hot Plug feature has been disabled and is NOT SUPPORTED.
6.2
Server Board – PCIe* Add-in Card Support
The server board within the Intel® Server System M70KLP includes six (6) onboard PCIe 3.0 add-in card slots:
four (4) PCIe X8 + two (2) PCIe X16. A silkscreen label next to each add-in slot identifies the slot by number
(PCIe 0 through PCIe 5) and by the CPU where its PCIe lanes are routed from (CPU0 through CPU3). Each
onboard add-in card slot supports a half-height, half-length PCIe add-in card.
5
4
3
2
1
0
Figure 33. Onboard PCIe* Add-in Slot Identification
44