Delta Electronics ASDA-A2 Series User Manual page 374

Call 1(800)985-6929 for Sales
P5 - 12  AYD0
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: -2147483648 ~ +2147483647
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to read the data block 0 of data arrady (Array[P5-11++]).
For example, when P5-11 is set to 100, the first read data displayed by P5-12 is the
100th data, the secondary read data is 101+1=102th data, the third read data is 102+1
= 103th data and vise versa. By the same logic, when P5-11 is set to 100, the first
written data displayed by P5-12 is the 100th data, the secondary written data is
101+1=102th data, the third written data is 102+1 = 103th data and vise versa.
However, if P5-12 is read via the drive keypad, only the 101th data will be read.
P5 - 13 AYD1
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: -2147483648 ~ +2147483647
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to read the data block 2 of data arrady (Array[P5-11++]).
The usage of this parameter is the same as the parameter P5-12. Only one function is
different. When P5-12 is read via the drive keypad, the first read data displayed by P5-
12 is the 100th data, the secondary read data is 101+1=102th data, the third read data
is 102+1 = 103th data and vise versa. It indicates that using P5-13 can read more than
one data via the drive keypad. Please note that using P5-13 can not write data via the
drive keypad.
P5 - 14 Reserved (Do Not Use)
Revision January 2011
Call 1(800)985-6929 for Sales
deltaacdrives.com
Data Array: Read / Write Data Block 1
Data Array: Read / Write Data Block 2
deltaacdrives.com
sales@deltaacdrives.com
Chapter 8 Servo Parameters
Address: 0518H, 0519H
Related Section: Section 7.2
Address: 051AH, 051BH
Related Section: Section 7.2
8-129
sales@deltaacdrives.com