Delta Electronics ASDA-A2 Series User Manual page 339

Call 1(800)985-6929 for Sales
Chapter 8 Servo Parameters
P2 - 40 EDI13
Default: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 015Fh
Data Size: 16-bit
Display Format: Hexadecimal
Settings:
Refer to P2-36 for explanation.
P2 - 41 EDI14
Default: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 015Fh
Data Size: 16-bit
Display Format: Hexadecimal
Settings:
Refer to P2-36 for explanation.
P2 - 42 Reserved (Do Not Use)
P2 - 43 NCF2
Default: 1000
Applicable Control Mode: ALL
Unit: Hz
Range: 50 ~ 2000
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to set second resonance frequency of mechanical system. It can
be used to suppress the resonance of mechanical system and reduce the vibration of
mechanical system.
If P2-43 is set to 0, this parameter is disabled.
The parameters P2-23 and P2-24 are the first group of notch filter parameters and the
parameters P2-43 and P2-44 are the second group of notch filter parameters.
8-94
Call 1(800)985-6929 for Sales
deltaacdrives.com
External Digital Input Terminal 13 (EDI13)
External Digital Input Terminal 14 (EDI14)
Notch Filter 2 (Resonance Suppression)
deltaacdrives.com
sales@deltaacdrives.com
Address: 0250H, 0251H
Related Section: Table 8.A
Address: 0252H, 0253H
Related Section: Table 8.A
Address: 0256H, 0257H
Related Section:
Section 6.3.7
Revision January 2011
sales@deltaacdrives.com