Delta Electronics ASDA-A2 Series User Manual page 237

Call 1(800)985-6929 for Sales
Lead Pulse Number
(Monitoring Variable
061)
Disengaging Timing
(P5-88 U Settings)
Auxiliary Function
(P5-88 BA Settings)
7-34
Call 1(800)985-6929 for Sales
deltaacdrives.com
Function of Clutch
When the direction of lead pulse is not set correctly, it will cause
that the value of the monitoring variable 061 becomes higher
and higher and finally lead to overflow. At this time, E-Cam
function will be disabled (P5-88 X=0) and the status of E-Cam will
be forced to be changed to Stop.
This option is used to determine the disengaging timing when the
status of E-Cam is Engaged.
Please note that the condition 2, 4, and 6 are mutually exclusive;
that is, only one of them can be selected.
U Disengaging Conditions
Do not disengage. When P5-88 X=0,
0
E-Cam disengaged.
Disengage when DI signal, CAM
1
(DI=0x36) is OFF.
Fixed number of master pulses (P5-
2 89) to disengage. (The polarity sign
indicates the direction)
(This setting is only available in
firmware V1.009 and later models)
Fixed number of master pulses (P5-
89) to disengage for smooth speed.
The function is the same as the
setting of U=2. The difference is that
6
the speed will not change when
disengaging and the engaging length
will exceed the setting value of P5-89
a little. This setting is suitable for
the application which needs to use
PR command immediately when
disengaging.
(This setting is only available in
firmware V1.009 and later models)
Fixed number of master pulses (P5-
4
89) to disengage with cycle function.
(The polarity sign indicates the
direction)
8 Shut down E-Cam when disengaging.
Call PR defined in P5-88 BA settings when disengaging (only when
P5-88 U=2, 4, or 6 is selected). When E-Cam returns to the status
of Stop, the designated PR defined in P5-88 BA settings will be
executed immediately.
deltaacdrives.com
sales@deltaacdrives.com
Chapter 7 Motion Control Functions
States of E-Cam
when disengaging
(Path 5)
Change to the
status of Stop
(Path 5)
Change to the
status of Stop
(Path 5)
Change to the
status of Stop
(Path 5)
Change to the
status of Stop
(Path 4)
Return to the status
of Lead Pulse
(before engaging)
(The lead pulse
number is set in P5-
92).
P5-88 X=0
Revision January 2011
sales@deltaacdrives.com