Roland R1000 Series Manual page 53

Manual
Double Sheet Detector R1000 series E20
with integrated fieldbus interface
Mounting
B0046191 / Rev. 1.12
Mounting of the sensor bracket
The mounting plate has a total of 10 M8 tap holes at distances of 50 and 100 mm. At least 2 of
them must be used for mounting. An adapter with 25 mm shank for swivel arm is available. Other
adapters may be ordered by request. Item 1 - 4 describes the mounting of the sensor into the
sensor bracket and item 5 - 8 describes the mounting of the sensor bracket.
Fig. 28: Mounting of the sensor bracket SHX42
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
53