Roland R1000 Series Manual page 52

Mounting
4.3.4 Spring mounted sensor bracket SHX42
Features:
• Very stiff in extended condition, for lateral acceleration up to 2g. Thus precise putting on the
sheet without canting, also on splayed sheets or bevelled TWB stacks.
• Very elastic in pressed condition and movable into all directions. Lateral motions of the sheet
being transported can thereby also be compensated up to approx. ±1 centimetre.
• No appearance of lateral forces, thus only minimal wear.
• Fast suction and releasing of the sheets due to small air volume under the suction hood,
compared to bellows suction cups.
• Same sealing gasket and burled plate as used with the Roland SHS42GS.
• Good access to the sensor from above, no counter-nut required.
• Fixing of sensor by lateral headless screw with plastic pressure pad.
Fig. 26: Sensor bracket SHX42
Fig. 27: Base plate for sensor bracket SHX42
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
52
Double Sheet Detector R1000 series E20
with integrated fieldbus interface
Manual
150
110 Ø
B0046191 / Rev. 1.12