Roland R1000 Series Manual page 117

B0046191 / Rev. 1.12
system parameter
Snet:255.255.255.
Fig. 79: Setting SubNet
system parameter
GWay: 0.
Fig. 80: Setting Gateway
system parameter
bus baud rate: 500kb
Fig. 81: Setting bus baud rate
Depending on the fieldbus type, the bus baud rate can be set:
Profibus: up to 12Mbps/s; selection at master
ControlNet: -----
DeviceNet: 125/250/500/kBit
CanOpen: 10/20/50/125/250/500/800/1000 kbps
ProfiNet IO: ----
CC-Link: 125/625kbps 2,5/5/10Mbps
EtherNet/IP: – –
EtherCAT: – –
Interbus: 500 kbits/s
System parameter 6: Deleting all measuring programs.
system parameter
CLR param.:
Fig. 82: Deleting of measuring programs
Possible choices:
• yes
• no
System parameter 7: not available (reserve).
system parameter
not available
Fig. 83: Reserved system parameter
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series E20
with integrated fieldbus interface
5c
0
5d
0. 0. 0
5b
6
no
Attention The deletion cannot be undone.
7
Manual
Here is the SubNet selected.
Here is the Gateway selected.
Start-up
117