Roland R1000 Series Manual page 35

B0046191 / Rev. 1.12
Method b)
Advantageous when measuring the same sheet thickness with each sensor. Each measurement
sensor is addressed via the inputs A/B of the control unit. In addition, the result of each
measurement is available as output.
Start
PLC
01. Select sensor 1 via A/B
02. Measure program. 1
03. Evaluate result of program 1
04. Select sensor 2 via A/B
05. Measure program. 1
06. Evaluate result of program 1
07. Select sensor 3 via A/B
08. Measure program. 1
09. Evaluate result of program 1
10. Select sensor 4 via A/B
11. Measure program. 1
12. Evaluate result of program 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series E20
with integrated fieldbus interface
Note Advantage: Substantial time saving compared to program
switching.
1 2
0.9 mm
(.035 in.)
Note Sensor selection via "external (inputs A and B)" must be selected in the
system configuration.
Manual
Program
* If sensor selection A/B configured, the
sensor number cannot selected in the
program.
3 4
0.9 mm
(.035 in.) (.035 in.)
System description
Thickness
1 0.9 mm
0.9 mm 0.9 mm
(.035 in.)
Sensor
- *
35