B0046191 / Rev. 1.12
4.3.3.3
Spring loaded sensor bracket SHS75GS with flat suction cup
The spring loaded sensor bracket SHS75GS with flat suction cup is intended for accommodating
the sensors. It is well suitable for use in feeder destacking applications (only vertical motions, no
turning motions).
Suction cup
Fig. 25: Spring loaded sensor bracket SHS75GS with flat suction cup
Pos: 34 /Doppelblech/Sensoren/Sensorhalterungen/Gefederte Sensorhalterung SHX42 @ 1\mod_1215005516500_501.docx @ 6422 @ 34 @ 1
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series E20
with integrated fieldbus interface
Spring loaded sensor bracket
Sensor
Rubber nipples
Sensor edge
Connection 1/4"
All dimensions are in mm. The dimensional tolerance is ± 0.4 mm
Manual
Clamping bracket SHK
Sensor
"A"
View in direction "A"
without clamping bracket
10.5
152.5
94
ø25
M8
25
see fig.
"Spring travel"
160
20.5
Mounting
51