Configuring Avaya Spaces Integration; Enabling Xt Series To Present In Avaya Spaces Meetings - Avaya XT Series Deployment Manual

Advanced Configuration of the XT Series
The More choice in home page is available only if a Screen Link client is paired or a
streaming session can be activated or is available.
• When in a call, open the call panel, select Meeting Options and click Unpair Screen Link.

Configuring Avaya Spaces integration

About this task
You can disable the Avaya Spaces integration or change the Avaya Spaces cloud address. The
XT Series device can only accept invitations and calls in the same cloud domain. By default, each
XT Series with Avaya Spaces integration is enabled for the domain:
spaces.avayacloud.com
Procedure
1. Access the Avaya Spaces settings. From the XT Series web interface, select
Administrator Settings > Avaya Spaces > General. From the endpoint's main menu,
select Configure > Advanced > Avaya Spaces.
• On the web interface, XT Series displays the General window.
• On the endpoint, XT Series displays the Avaya Spaces window.
2. Set the fields as follows:
• At the Enabled field, select Yes to enable the Avaya Spaces integration.
• At the URL field, type your Avaya Spaces cloud address.
3. Click Save.

Enabling XT Series to present in Avaya Spaces meetings

About this task
The XT Series can connect to Avaya Spaces using SIP, H.264 SVC 720p with Wideband Opus
audio as a default. Avaya Netsense estimates and adapts to bandwidth fluctuations. You can only
present content from the XT Series in an Avaya Spaces meeting using Web Collaboration. Avaya
recommends checking if Web Collaboration is enabled on the endpoint.
Procedure
1. Access the call settings. From the XT Series web interface, select Administrator
Settings > Calls. From the endpoint's main menu, select Configure > Advanced > Calls.
2. Ensure that the Dual Video field is enabled for Web Collaboration.
August 2020 Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
https://
230