Applying The Automatic Provisioning To Avaya Room System Xt Series Endpoints - Avaya XT Series Deployment Manual

Applying the Automatic Provisioning to Avaya Room
System XT Series Endpoints
About this task
When you start the XT Series endpoints for the first time, the Quick Setup Wizard guides you
through the steps for applying the service code. You can also relaunch the wizard at any time to
refresh your configuration settings.
Procedure
1. Do one of the following:
• From the XT Series web interface, select Basic Settings > Quick Setup.
• From the XT Series endpoint, start the XT Series endpoint for the first time.
XT Series displays the quick setup wizard.
2. Do one of the following:
• From the XT Series web interface, select Auto Provisioning.
• From the XT Series endpoint, select your preferred language from the drop-down list.
3. Click Next.
4. Do one of the following:
• From the XT Series web interface, select your preferred language from the drop-down
list.
• From the endpoint's main menu, select Auto Provisioning.
5. Click Next.
6. Enter the service code.
You can enter a full service code, consisting of a 5-digit Server Service Code identifying
the Avaya Meetings Management server, and a 7-digit Endpoint Service Code identifying
the provisioned endpoint. Alternatively, you can enter a partial service code, consisting only
August 2020

Applying the Automatic Provisioning to Avaya Room System XT Series Endpoints

Figure 47: Post-provisioned endpoint with icon
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
93