Avaya XT Series Deployment Manual page 95

Procedure
1. Log on to the Element Management System (EMS) web interface.
This is the administrative interface of Avaya SBCE.
2. In the left navigation pane, click Device Specific Settings > DMZ Services > Relay
Services.
The system displays the Relay Services page.
3. In the Reverse Proxy tab, click Add.
4. On the Add Reverse Proxy Profile page, do the following:
a. In the Service Name field, type the reverse proxy profile name.
b. Select the Enabled check box.
c. In the Listen IP field, set the external Avaya Meetings Management IP address or
FQDN.
d. In the Connect IP field, set the internal Avaya Meetings Management IP address or
FQDN.
e. In the Listen Protocol field, select the security protocol.
For security reasons, Avaya recommends the use of HTTPS. If you select the HTTPS
protocol, the system enables the Listen TLS Profile field.
f. In the Listen TLS Profile field, click the TLS profile you created for the Avaya
Meetings Management server.
The default TLS profiles, such as AvayaSBCServer have demonstration certificates.
For optimum security, Avaya recommends that you do not use demonstration
certificates.
g. In the Listen Port field, type the port for remote workers.
The default value is 443 for HTTPS and 80 for HTTP.
h. In the Server Protocol field, select the security protocol.
For security reasons, Avaya recommends the use of HTTPS.
i. In the Server TLS Profile field, click the TLS profile that you created for the Avaya
Meetings Management server.
j. In the Connect IP field, click the IP address that Avaya SBCE must use for
communicating with the file servers.
k. In the Server Addresses field, type the Avaya Meetings Management server IP
address and port number.
For example,
11.22.33.44:443
August 2020
Connecting an XT Series outside the enterprise for the purposes of auto-provisioning
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
95