Avaya XT Series Deployment Manual page 122

Manually setting up the XT Series
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the monitor settings. From the XT Series web interface, select Administrator
settings > I/O connections > Monitor. From the endpoint's main menu, select
Configure > Advanced > I/O connections > Monitor.
2. Select General to access the general settings.
3. Configure the general settings:
August 2020
Figure 54: Single monitor video layouts with presentation
Figure 55: General Monitor Settings
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
on page 151.
122