About The Built-In Mcu - Avaya XT Series Deployment Manual

Feature Avaya XT7100
Recording
Keyboard and
mouse
control
Related links
About the XT Series

About the Built-In MCU

You can use your Avaya Room System XT Series to join a videoconference hosted on an external
MCU or you can host a meeting on the built-in MCU if available.
A Multipoint Control Unit (MCU) connects several endpoints to a single videoconference. It can
manage multiple separate conferences simultaneously. It manages the audio mixing and creates
the video layouts, adjusting the output to suit each endpoint's capabilities (transcoding). The term
MCU refers to any Avaya or third party MCU.
You can add a license to most XT Series models to activate the built-in MCU to host
videoconferences locally (see Deployment Guide for Avaya Room System XT Series):
• MCU4 can host videoconferences with up to four participants (one local, three remote), with
additional calls (up to eight) being placed in audio-only mode.
• MCU9 can host videoconferences with up to nine participants (one local, eight remote).
Important:
The Avaya XTE240 and Avaya XT4300 can host up to four video participants.
The embedded MCU can mix standard definition and HD endpoints in the same meeting, without
one impacting on the other. The built-in MCU also supports both wide-screen (16:9) and standard
formats (4:3), incorporating them seamlessly into the video layout. In order to conserve bandwidth,
you can limit the number of participants that the embedded MCU can host.
August 2020
Avaya XT5000
Series/ Avaya
XT5000 Series
720
Optional for Avaya
XT5000 Series 720
on page 10
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Avaya XTE240 Avaya XT4300
Optional Optional
(Only with
XT Control if
used as
personal
endpoint)
About the Built-In MCU
Avaya XT
Telepresence
—
19