Connecting A Computer To The Xt Series; Connecting A Computer To The Xt Series Using The Dvi Port - Avaya XT Series Deployment Manual

Setting Up the XT Series Hardware

Connecting a Computer to the XT Series

You can connect your computer to the XT Series using the DVI port or the HD1 port.
Presenting content on XT7100 with Presentation Content disabled or presenting
content on all other models in the XT Series
• When DVI content is displayed on the XT Series and another Avaya Equinox
client has an active Screen Link connection with the same XT Series, the pairing fails. The
Forbidden icon is displayed next to the endpoint or, in the case of manual pairing, the
Endpoint unavailable message is displayed. To activate Screen Link from a different client,
terminate the presentation on the XT Series by pressing Present. Alternatively, you can stop
Screen Link from the client.
• The XT Series allocates presentation priority to the DVI first, followed by Screen Link. You
must unplug the DVI to show the Screen Link content.
• If you plug in the DVI input while Screen Link content is sent or shown, the Screen Link
content is automatically stopped. The physical connection is used instead of the Screen Link.
Presenting content on XT7100 with Presentation Content enabled for HD1
• When Presentation Content is enabled on HD1, the DVI input is used for presentation only
if there is no input from HD1. If there is input from HD1, HD1 has precedence for
presentation. The XT7100 allocates presentation priority to the HD1 input first, followed by
DVI, then Screen Link. You need to unplug both the HD1 and the DVI to show the Screen
Link content.
• If you plug in the DVI or HD1 input while Screen Link content is sent or shown, the Screen
Link content is automatically stopped. The physical connection is used instead of the Screen
Link.
• If you plug in the HD1 input while DVI content is sent or shown, the DVI content is
automatically stopped.
Related links
Setting Up the XT Series Hardware

Connecting a Computer to the XT Series using the DVI port

Connecting a Computer to the XT Series using the HD1 port
Connecting a Computer to the XT Series using the DVI port
About this task
Connect a computer to share a presentation or other content with other participants. You can
display the content to participants in a local conference room, as well as to remote participants
during a call. You connect the video separately from the audio. The computer video is routed to
the DVI port on the XT Codec Unit, while the audio is routed to the audio-in
When you share a computer's sound during a call, remote participants hear the computer's audio
output as well as the audio from the Microphone Pod. However, analog microphones like the one-
way Microphone Pod use the same audio-in
August 2020
on page 52
port as a connected computer, so to use both at
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
®
on page 80
on page 83
port.
Conferencing
80