Avaya XT Series Deployment Manual page 184

Advanced Configuration of the XT Series
Table 47: Configuring recording settings
Field
Location
Resolution
August 2020
Description
Enable recording and playback by defining a location to store the recordings, from the
options listed below. To disable recording and playback on this endpoint, select No
Recording.
• Automatic (default option): Select to choose the location each time you record.
When you access the recording menu, the XT Series displays the available options
to record at that time:
- You can record videoconferences or local presentations to a USB storage device
with enough available disk space.
- You can record meetings directly to the network if your Avaya Meetings Server
includes a recording server, the XT Series is managed by Avaya Meetings
Management, and the meeting is hosted by an external Scopia Elite MCU or the
Avaya Meetings Server Media Server (or an older model). For details, contact your
administrator.
• USB Storage: Select to only record to a local USB storage device. You can record
videoconferences or local presentations, and then view the recordings on the
endpoint itself, or using any standard media player. The system saves the file as an
MP4, and records the video in H.264 format with audio in AAC-LC format. You can
also configure the XT Series to automatically save your locally recorded files to an
external ftp/s server or to the Avaya Meetings Streaming and Recording.
• Equinox Recording Server: Select to only record meetings to the network, even if
a local USB storage device is connected. You can only record to the network if your
Avaya Meetings Server includes a recording server, the XT Series is managed by
Avaya Meetings Management, and the meeting is hosted by an external Scopia Elite
MCU or the Avaya Meetings Server Media Server (or an older model). For details,
contact your administrator.
Select the video resolution to use when recording meetings to a local USB storage
device. The frame rate is limited to 25fps. For best quality, use the default 1080p
resolution, but use a lower value if your media player does not support higher
resolutions.
When you change the resolution, the system automatically selects the optimal bitrate
for this resolution.
You cannot change the video resolution for meetings recorded to the network. If you
selected Automatic as the Location, this resolution is applied only when recording to
the USB device.
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Table continues...
184