Avaya XT Series Deployment Manual page 203

2. Set the fields as described in
Table 55: Enabling remote upgrades
Field Name
Download Management
Enable All Addresses
Addresses
Subnet Mask
Password Protect
Password
Verify Signature
3. From the web interface only, select Save.
August 2020
Figure 98: Enabling remote access to the XT Series
Table 55: Enabling remote upgrades
Description
Select Yes to enable upgrades.
Select Yes to enable remote upgrades from any IP address. Select
No to restrict access from a specified range of addresses only,
defined in the Address and Subnet mask fields in this screen.
Specify the IP address allowed to upgrade this device remotely (only
relevant if you set the Enable all addresses field to No). This can
represent a range of addresses in conjunction with the Subnet Mask
field.
Turn the above Address field into a range of addresses by defining its
subnet mask. This range represents the addresses allowed to
upgrade this device remotely (only relevant if you set the Enable all
addresses field to No).
Select Yes to ensure that a mandatory password is entered before
initiating the upgrade. Select No to disable password protection.
You can define a password that must be inserted before initiating the
upgrade. Note than when defining a password, only interactive
upgrade is allowed. Software upgrade by way of a USB key or Avaya
Meetings Management is disabled
Select No to disable verification. Select Yes to enabled verification.
Verification must be disabled if you want to rollback or downgrade XT
Series.
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Updating the XT Series
on page 203.
203