Avaya XT Series Deployment Manual page 91

Field Name
SIP Server 2
SIP Server 3
SIP Username
Authentication Name
Authentication Password
SIP Transport Type
Max Bandwidth
Default Call Bandwidth
(Kbps)
MTU Size
Video Mode
Pairing Mode
11. Click Apply.
Avaya Meetings Management generates an endpoint service code to be used by the XT
Series endpoint. Furthermore, the endpoint details appear, where you enter an email
address for the user to receive notification that the endpoint has been pre-provisioned.
August 2020
Provisioning Avaya Room System XT Series endpoints automatically
Description
The second SIP server through which the endpoint registers for
calls. The endpoint uses this server if SIP Server 1 is not
available.
The third SIP server through which the endpoint registers for
calls. The endpoint uses this server if SIP Server 1 and SIP
Server 2 are not available.
The username used to connect to the SIP server.
Enter a name used for authentication of the SIP server.
Enter the password used for authentication of the SIP server.
Select the protocol used by the SIP server:
• UDP
• TCP
• TLS
Select the maximum bandwidth of the endpoint.
Select the maximum bandwidth of the call managed by the
endpoint, measured in kilobytes per second (kbps).
The size of the maximum transmission unit, measured in bytes.
Select the video mode, according to the type of picture
displayed in the endpoint.
• Motion: Select when the displayed picture is in motion.
• Sharpness: Select when the displayed picture is stationary.
Select the pairing mode for Screen Link/Mobile Link:
• Disabled
• Enable - No PIN
• Enable - Ask PIN (Manual pairing)
• Enable - Ask PIN (Always)
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
91