Mount The Ja2500 Appliance; Front-And-Rear Mounting The Ja2500 Appliance Flush To A Rack - Juniper Junos Space JA2500 Quick Start Manual

Mount the JA2500 Appliance

Copyright © 2018, Juniper Networks, Inc.
Open the top flaps on the shipping carton.
3.
Pull out the packing material holding the appliance in place.
4.
Read the General Safety Guidelines and Warnings in the JA2500 Junos Space Appliance
5.
Hardware Guide carefully.
Remove the appliance from the shipping carton.
6.
Verify the appliance chassis components received against the packing list.
7.
Table 1 on page 7 lists the items provided with the appliance.
Save the shipping carton and packing materials in case you need to move or ship the
8.
appliance later.
Table 1: Items in the JA2500 Appliance Shipping Carton
Component
Junos Space JA2500 appliance chassis
Power cable
Mounting kits
RJ–45 to DB–9F cable with adapter, 7 ft console cable
7-ft, blue, Category 5e cable
Safety Information Reference for Hardware Platforms
You can mount the JA2500 appliance in one of the following configurations:
Front-and-Rear Mounting the JA2500 Appliance Flush to a Rack on page 7
Front-and-Rear Mounting the JA2500 Appliance Recessed in a Rack on page 8
Midmounting the JA2500 Appliance in a Two-Post Rack on page 9

Front-and-Rear Mounting the JA2500 Appliance Flush to a Rack

To mount the JA2500 appliance front and rear flush to a rack, do the following:
Insert four rack-mount screws on each side of the appliance to secure the front of the
1.
chassis to the equipment rack.
Slide the rear-mount rail brackets into the backs of the front rails on either side of the
2.
chassis and align with your rear equipment rack posts, as shown in
Mount the JA2500 Appliance
Quantity
1
1
2
1
2
1
Figure 3 on page 8.
7