Installing The Jsa5800 Appliance Using Front-And-Rear-Mounting Flush To A Rack - Juniper JSA5800 Hardware Manual

Installing the JSA5800 Appliance Using Front-and-Rear-Mounting Flush
to a Rack
The chassis package includes a pair of rack rail assemblies and mounting screws required to install the
chassis in a rack. Each rail assembly consists of an inner, a middle, and an outer rail, as shown in
on page 26.
Figure 7: Identifying the Inner, Middle, and Outer Rails
1 Inner rail
—
Locking tab
2
—
Middle rail
3
—
To mount the JSA5800 appliance in a four-post rack:
1. Install the inner rail extensions.
4 Outer rail
—
Locking tab
5
—
26
Figure 7