Configuring The Jsa5800; Configuring Basic Settings On The Jsa5800 Appliance - Juniper JSA5800 Hardware Manual

4. Plug a RS-232 (DB-9 F/F) cable into the console port.
NOTE: When using a laptop to connect to the appliance, you must use a terminal program,
such as HyperTerminal, to connect to the appliance.
5. Select the appropriate COM port to use.
6. Configure the following port settings:
• Bits per second = 9600
• Stop bits = 1
• Data bits = 8
• Parity = None
RELATED DOCUMENTATION
Connecting the JSA5800 to Power | 32
Installing the JSA5800 Appliance | 23

Configuring the JSA5800

IN THIS SECTION

Configuring Basic Settings on the JSA5800 Appliance | 36

Accessing the JSA Interface | 39
Configuring Basic Settings on the JSA5800 Appliance
To configure the basic setting using the JSA interface:
36