Cable And Pinout Specifications; Ctp150 Interface Module Hd-26 Connector Cable Pinouts; Connector Interface Signal Pinouts (Db-25 Female Dce) - Juniper CTP150 Manual

CHAPTER 6

Cable and Pinout Specifications

CTP150 Interface Module HD-26 Connector Cable Pinouts

EIA-530 Connector Interface Signal Pinouts (DB-25 Female DCE)
Table 5: EIA-530 Connector Interface Signals for HD-26 to Female DB-25
HD-26 Pin DB-25 Pin
1 3
Copyright © 2015, Juniper Networks, Inc.
CTP150 Interface Module HD-26 Connector Cable Pinouts on page 23
CTP150 Console Cable Pinouts on page 30
CTP Fast Ethernet and Power Cables on page 31
The CTP150 device has five separate EIA-530 cabling options for the serial interface
module, with a male HD-26 connector on the module end and the following connectors
on the DCE or DTE end:
Female DB-25 connector on the DCE end for EIA-530/RS-422/V.11, RS-232/V.24, V.35
Male DB-25 connector on the DTE end for EIA-530/RS-422/V.11, RS-232/V.24, V.35
Female DB-15 connector on the DCE end for X.21
Male DB-15 connector on the DTE end for X.21
RJ-45 connector for Radio V.24 Sync interface
The pinouts for these connections have different configurations for EIA-530, RS-232,
voice, and T1 interface signals.
EIA-530 Connector Interface Signal Pinouts (DB-25 Female DCE) on page 23
EIA-530 Connector Interface Signal Pinouts (DB-25 Male DTE) on page 25
X.21 Connector Interface Signal Pinouts (DB-15 Female DCE) on page 26
X.21 Connector Interface Signal Pinouts (DB-15 Male DTE) on page 27
V.24 Connector Interface Signal Pinouts (RJ-45 Male) on page 28
Table 5 on page 23 lists the EIA-530 interface signal pinouts for the HD-26 connector to
the female DB-25 connector for the CTP150 platform.
Description
Receive data (RD)—A
Circuit
BB
23