System Reboot - Planet WGSW-20160HP User Manual

4.2.21 System Reboot

The Reboot Page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user have to
re-login the WEB interface about 60 seconds later, the System Reboot screen in
Buttons
: Click to reboot the system.
: Click to return to the Port State Page without reboot the system.
You can also check the SYS LED at the front panel to identify the System is load completely or not. If the
SYS LED is blinking, then it is in the firmware load stage; if the SYS LED light on, you can use the WEB
browser to login the Managed Switch.
Figure 4-2-28: System Reboot Page Screenshot
77
User's Manual of WGSW-20160HP
Figure 4-2-28 appears.