Table of Contents
Advertisement
4. Exit [ESC] – Returns to the Run screen.
The History screen shows some information about the tightenings stored in unit memory. More
information about the tightenings is not shown but is available via the network protocols. This
screen shows:
• Time – The time the tightening occurred. The date is indicated at the top of the table and
each time it changes in a white row. The current time is shown at the bottom of the screen
for comparison.
• T# – The tool number that produced the tightening
• Param – The number and name of the parameter that produced the tightening
• Count – The current batch count and batch size for the tightening
• Id – The tightening id number. This screen shows only the last 4 digits of the id number;
additional digits may be present in the network commands.
Unit Status
Soft keys
1. I/O – Go to the I/O Status screen (see Chapter 5: Discrete I/O).
2. Network – Go to the Network Status screen.
3. Tool – Go to the Tool Status screen.
4. Exit [ESC] – Returns to the Run screen.
The Unit Status screen shows some basic information about the current unit configuration that
may be useful for diagnostics purposes.
The average signal strength is for all tools learned to the unit and should be from 0 to -70 dBm.
If the signal strength is weaker, the unit may have frequent slow or failed communication. To
improve the signal strength, try bringing the unit and tools closer together, changing the XBEE
channel, or reducing sources of interference from the environment.
Last barcode shows the command number of the last bar code scanned (see Chapter 4: ) or an
error if the last attempt bar code could not be processed. VIN and ID 2-4 show what will be
included with tightenings in the associated result data fields. The Selector field is used with the
VIN Selections field described in Chapter 4: Serial Communications.
EYFR03 User Manual
Chapter 1: Overview
Figure 8: Unit Status screen
18 of 110
v1.6.0
20 January 2020
Advertisement
Table of Contents
