Panasonic EYFR03 User Manual page 78

C.E. Group Object
Class Code: 66 Hex
The C.E. Group Object refers to a group of parameters that may be run simultaneously, but must
all run to complete an operation. This should not be confused with the Group Object (class code
12 hex) defined in the open portion of the EtherNet/IP
is not implemented in this product line.
Class Attributes
ID Access Name
1 Get Revision
2 Get Max Instance
Instance Attributes
ID Access Name
1 Set Name
2 Get Last Modified
3 Get Number of
Parameters
4 Set Parameters
Services
Service Available in
Code
Class Instance
0x05 No Yes
0x0E Yes Yes
0x10 No Yes
EYFR03 User Manual
Chapter 7: EtherNet/IPTM
Data Type
UINT Revision of this object
UINT Maximum instance number
of a parameter set object in
the device.
Data Type
SHORT_STRING Name of the group.
DT Last time the group
attributes were modified
USINT Number of parameters in
Parameters array
ARRAY of Parameters in group.
STRUCT of:
UINT Instance number of the
parameter
USINT Batch size
Service Name
Reset Resets the group to factory defaults.
Get_Attribute_Single Returns the contents of the specified attribute.
Set_Attribute_Single Modifies a single attribute.
78 of 110
TM
protocol, which has a different use and
Description of Attribute
Description of Attribute
Description of Service
Semantics of Value
1
The maximum number of
groups as specified for
the product.
Semantics of Value
Maximum length is 25
characters
Maximum 16
Temporarily overrides,
but does not modify,
batch size in parameter
v1.6.0
20 January 2020