Panasonic EYFR03 User Manual page 35

4. Cancel [ESC] – Discards changes to the job and returns to the Choose Job screen
Name
The job name can be up to 25 numbers, letters, or decimal points.
The job name is shown on screen when running the job but is not sent to the network.
Number of Steps
Shows the number of steps currently defined in the job.
Lock on done
Default: No
This setting determines if the unit will lock or restart the job when the job is completed. When
set to Yes, the qualifier will not restart the job when the last step completes. When set to No, the
qualifier will restart the job when it completes.
Batch beep on
Default: Job
Values: Job, Parameter
This setting determines if the unit will sound the batch beep for each step in the job or only when
the entire job is completed. The UI will show the batch color for each individual parameter
when it completes regardless of this setting.
Job Step Selection
Figure 34: Job Step Select screen
Soft keys
1. 11-20 – Shows steps 11-20 of the group. When steps 11-20 are showing, this key changes to
"21-30". When steps 21-30 are showing, this key changes to "1-10".
2. Parameter – Makes the selected step in the job a parameter step.
3. Group – Makes the selected step in the job a group step.
4. Exit [ESC] –Returns to the Job Edit screen.
Changes made on this screen are saved or discarded when exiting the Job Edit screen.
EYFR03 User Manual 35 of 110 v1.6.0
Chapter 3: Configuring the unit 20 January 2020