Network Settings - Panasonic EYFR03 User Manual

Parameter/Group column
In the Parameter/Group column, you may select the parameter or group to run at each step in the
job by typing the number of the desired parameter in each row. The P or G to the left of this
column indicates whether a parameter or group is currently selected. To switch between a
parameter and a group, use the soft keys. The order on this screen determines the order they are
run in the job.
Parameters and groups may be used multiple times within the same job. Groups in free run
mode cannot be used in a job, since they would never complete and allow the job to continue.
Batch column
In the batch column, you may enter the batch size for the parameter steps when running it as part
of the job. This column will be empty for group steps. When a parameter is selected, this
column will be filled with the batch currently defined in the parameter itself. Changing values in
this column only affect the parameter while it is running in the job but does not change it in any
other group or job or when the parameter runs on its own.

Network Settings

Figure 35: Main Menu - Network
Settings
Soft keys
1. No function
2. No function
3. Save – Saves changes to the general network settings and returns to the Network Settings
menu
4. Cancel [ESC] – Discards changes to the general network settings and returns to the Network
Settings menu
Changes to these settings only apply after the qualifier is rebooted.
See the protocol specific chapters for information about the configuration options for each
protocol.
Configuration Options
IP Address
Default: 192.168.1.68
EYFR03 User Manual
Chapter 3: Configuring the unit
Figure 36: Network Settings Menu -
General
36 of 110
Figure 37: General Network Settings
20 January 2020
v1.6.0