Panasonic EYFR03 User Manual page 13

Figure 1: No active parameter
Figure 4: 2-4 active parameters
Tightening Notifications
Every time a tightening is received from a running tool, the background of the area of the screen
showing the current parameter and batch count for the tool will be shaded with a color indicating
the status of the tightening.
• Red – A rejected tightening occurred.
• Green – An accepted tightening occurred that did not complete a batch.
• Blue – An accepted tightening occurred that completed a batch. If the qualifier NOKs setting
is set to Count, this further indicates that no rejected tightenings were counted towards this
batch.
• Yellow – An accepted or rejected tightening occurred that completed a batch. This color will
only occur when the qualifier NOKs setting is set to Count and one or more rejected
tightenings were counted towards the current batch.
EYFR03 User Manual
Chapter 1: Overview
Figure 2: Suspended
Figure 5: 5-9 active parameters
13 of 110
Figure 3: 1 active parameter
Figure 6: 10-16 active parameters
20 January 2020
v1.6.0