Panasonic EYFR03 User Manual page 88

Multi Number UINT
Multi Type USINT
Parameter UINT
Parameter Name USINT[25]
Parameter DT
Timestamp
Tool Serial USINT[14]
Number
Tightening Status BOOL
Count USINT
Batch USINT
Torque Unit ENGUNIT
Torque REAL
Min Torque REAL
Max Torque REAL
Angle UDINT
Min Angle UDINT
Max Angle UDINT
VIN USINT[100]
Reserved USINT
Total size: 192 bytes
131
Name
Tightening ID UDINT
Time DT
Multi Sequence UINT
Number
Multi Number UINT
Multi Type USINT
Parameter UINT
Tightening Status BOOL
Count USINT
Batch USINT
Torque Unit ENGUNIT
Torque REAL
Angle UDINT
VIN USINT[100]
Total size: 130 bytes
EYFR03 User Manual
Chapter 7: EtherNet/IPTM
Instance number of multi-parameter operation (job or group) currently
running. Ignored if 0.
Type of multi-parameter operation currently running:
1 – Group
2 – Job
Ignored if Multi-Number is 0.
Instance number of the parameter that produced the tightening
Name of the parameter
Timestamp of the last change to the parameter
Serial number of the tool that produced the tightening.
Indicates if the last tightening was accepted as valid.
Number of results performed in the current batch for the parameter.
Number of results required for a batch in the parameter.
Unit used for torque fields
Torque of the tightening just performed.
Minimum torque required for a tightening in the parameter.
Maximum torque required for a tightening in the parameter.
Angle of the tightening just performed.
Minimum angle required for a tightening in the parameter.
Maximum angle required for a tightening in the parameter.
Padding byte for devices requiring even connection point sizes.
Data Type
ID number of the last tightening
Timestamp of the last tightening
Sequence number of the running multi-parameter operation.
Instance number of multi-parameter operation (job or group) currently
running. Ignored if 0.
Type of multi-parameter operation currently running:
1 – Group
2 – Job
Ignored if Multi-Number is 0.
Number of the parameter that produced the tightening
Indicates if the last tightening was accepted as valid.
Number of results performed in the current batch for the parameter.
Number of results required for a batch in the parameter.
Unit used for torque fields
Torque of the tightening just performed.
Angle of the tightening just performed.
88 of 110
Description
20 January 2020
v1.6.0