Vendor-Specific Objects - Panasonic EYFR03 User Manual

This chapter describes the assembly object connection points and vendor-specific objects
provided by the EYFR03. Implementation was done against EtherNet/IP
1.16 (April 2014) and the associated CIP specification edition 3.16 (April 2014)

Vendor-Specific Objects

The objects described in this section are vendor-specific objects created by C.E. Electronics
(vendor ID: 1321) to manage the configuration of the EYFR03 that does not map to existing
open objects.
Tool Object
Class Code: 64 Hex
The Tool Object represents a tool learned into an EYFR03 device. A tool may be associated
with one or more C.E. Parameter objects.
Class Attributes
ID Access Name
1 Get Revision
2 Get Max Instance
Instance Attributes
ID Access Name
1 Set Name
2 Get Last Modified
3 Get Type
4 Set Last Calibration
Date
5 Set Next Calibration
Date
7 Set Serial Number
8 Get Cycle Count
9 Set Cycles between
Preventative
Maintenance
10 Set Last PM Cycle
Count
11 Get Maintenance
Reject Options
12 Get Required
Maintenance
EYFR03 User Manual
Chapter 7: EtherNet/IPTM
Data Type Description of Attribute
UINT Revision of this object
UINT Maximum instance number
of a tool object in the
device.
Data Type Description of Attribute
SHORT_STRING Name of the tool displayed
on screen
DT Last time the tool attributes
were modified
USINT Type of tool
DT Date of last calibration
reported by tool
DT Recommended date of next
calibration
SHORT_STRING Serial number of the tool
UDINT Total number of cycles
performed by the tool.
UDINT Number of cycles permitted
between preventative
maintenance.
UDINT Cycle count at time of last
preventative maintenance
BYTE Causes all results from a
tool to be rejected when one
or more of the specified
maintenance operations are
required.
BYTE Indicates what maintenance
is currently required.
75 of 110
TM
specification edition
Semantics of Value
1
The maximum number of
tools as specified for the
product.
Semantics of Value
Maximum length is 25
characters
0 = none
1-3 = reserved
4 = battery
Maximum length is 14
characters.
Bit 0 – Calibration
Bit 1 – Cycles
Bit 0 – Calibration
Bit 1 – Cycles
v1.6.0
20 January 2020