Panasonic EYFR03 User Manual page 79

Job Object
Class Code: 67 Hex
The Job Object represents a set of one or more parameter sets that must be performed as a group.
Depending on the device configuration, the parameter sets may or may not be required to run in
sequence.
Class Attributes
ID Access Name
1 Get Revision
2 Get Max Instance
Instance Attributes
ID Access Name
1 Set Name
2 Get Last Modified
3 Get Number of Steps
4 Set Steps
Item number
Item type
Batch
Services
Service Available in
Code
Class Instance
0x05 No Yes
0x0E Yes Yes
0x10 No Yes
EYFR03 User Manual
Chapter 7: EtherNet/IPTM
Data Type
UINT Revision of this object
UINT Maximum instance number
of a job object in the device.
Data Type
SHORT_STRING Name of the tool displayed
on screen
DT Last time the job attributes
were modified
USINT Number of parameters in
Parameters array
ARRAY of Structure list containing the
STRUCT of: parameters to run for the job
UINT Instance number of the item
in the step
USINT Item type
USINT Batch size
Service Name
Reset Resets the job to factory defaults.
Get_Attribute_Single Returns the contents of the specified attribute
Set_Attribute_Single Modifies a single attribute
79 of 110
Description of Attribute
Description of Attribute
Description of Service
Semantics of Value
1
The maximum number of
jobs as specified for the
product.
Semantics of Value
Maximum length is 25
characters
Maximum length is 30.
Parameter or group
number.
0 – Parameter
1 – Group
Temporarily overrides,
but does not modify,
batch size in parameter.
Ignored for Group steps.
v1.6.0
20 January 2020