Upload Usb File To Device - Panasonic EYFR03 User Manual

Upload USB file to device

Figure 69: USB Menu - Upload Figure 70: USB Upload screen
When entering the USB Upload screen, the unit will look in the root folder to find any available
files to upload. Make sure you have no more than one file of a given type on the USB drive, as
the unit does not provide a way to select between multiple files of a given type.
Soft keys
1. Upload All – Uploads all files from the USB drive.
2. No function
3. Upload – Uploads the selected files from the USB drive.
4. Cancel [ESC] – Returns to the USB Menu screen.
Available Files
Firmware
Firmware files have the extension ".bec". If a file is found, the unit will validate the file before
uploading it. If a firmware file is uploaded, the unit will reprogram itself with the new firmware
and reboot.
Configuration
Configuration files have the extension ".eqc". If a file is found, the unit must validate the file
before uploading it. These files can be created by downloading from a qualifier or by saving a
configuration file from the PC application. This file contains all the configuration settings for
the unit, including tools, parameters, groups, jobs, qualifier and network settings, and I/O
settings. When uploading the configuration, all existing settings will be overwritten with the
new values. New tools referenced in the configuration file will need to be associated with the
qualifier, as if learning them to the unit.
EYFR03 User Manual 106 of 110 v1.6.0
Chapter 10: Data Management 20 January 2020