Enter New Password - Panasonic EYFR03 User Manual

Enter new Password

Figure 41: Enter new Password screen
Soft keys
1. Remove – Clears the unit password and returns to the Qualifier Settings screen.
2. No function
3. Save [ENT] – Keeps changes to the password and returns to the Qualifier Settings screen.
4. Cancel [ESC] – Cancels changes made to the password and returns to the Qualifier Settings
screen.
The Enter new password screen allows you to change the password to a string of up to 10 digits.
Note that the password entered on this screen will be shown in clear text as it is typed. Enter the
new password by typing the desired series of digits and pressing Save or ENT. The new
password will not be saved to permanent memory until saving from the qualifier settings screen.
If you decide not to change the password, press Cancel or ESC.
You may completely remove the password from the unit by pressing Remove. Removing the
password will allow unrestricted access to all functions of the unit until a new password is
entered. If you only want to temporarily disable the password, use the Exit button on the Main
Menu screen as described to return to the Run screen.
XBEE Channel Noise
The XBEE Channel Noise screen will test each of the available channels to determine how much
noise is already on those channels. The channel with the lowest amount of noise will be
indicated by a blue bar.
Figure 42: XBEE Channel Noise screen
EYFR03 User Manual 42 of 110 v1.6.0
Chapter 3: Configuring the unit 20 January 2020