Panasonic EYFR03 User Manual page 77

C.E. Parameter Object
Class Code: 65 Hex
The C.E. Parameter Object refers to a parameter that describes the required operation for a batch
of tightenings. This should not be confused with the Parameter Object (class code 10 hex)
defined in the open portion of the Ethernet/IP
implemented in this product line.
Class Attributes
ID Access Name
1 Get Revision
2 Get Max Instance
Instance Attributes
ID Access Name
1 Set Name
2 Get Last Modified
3 Set Tools
5 Set Batch
6 Get Number of
Batches
Services
Service Available in
Code
Class Instance
0x05 No Yes
0x0E Yes Yes
0x10 No Yes
EYFR03 User Manual
Chapter 7: EtherNet/IPTM
TM
protocol, which has a different use and is not
Data Type
UINT Revision of this object
UINT Maximum instance number
of a parameter set object in
the device.
Data Type
SHORT_STRING Name of the parameter
displayed on screen and
reported in results
DT Last time the parameter
attributes were modified
UINT Instance numbers of tool
used for this parameter
USINT Batch size
UINT Number of batches run in
this parameter
Service Name
Reset Resets the parameter to factory defaults.
Get_Attribute_Single Returns the contents of the specified attribute.
Set_Attribute_Single Modifies a single attribute.
77 of 110
Description of Attribute
Description of Attribute
Description of Service
Semantics of Value
1
The maximum number of
parameters as specified
for the product.
Semantics of Value
Maximum length is 25
characters
This value resets on
powerup.
v1.6.0
20 January 2020