Panasonic EYFR03 User Manual page 80

Controller Settings Object
Class Code: 68 Hex
The Controller Settings Object represents the qualifier level settings for the EYFR03.
Class Attributes
ID Access Name
1 Get Revision
Instance Attributes
ID Access Name
1 Get Radio Address
2 Set Radio Channel
3 Set Beeper Setting
4 Set Beeper Volume
5 Set Batch Timeout
6 Set Cycle Timeout
7 Set Reject Timeout
8 Set NOKs
9 Set Time
10 Set Name
Services
Service Available in
Code
Class Instance
0x0E Yes Yes
0x10 No Yes
EYFR03 User Manual
Chapter 7: EtherNet/IPTM
Data Type
UINT Revision of this object
Data Type
UINT The radio address of the
device
USINT The radio channel on which
the device is operating.
BYTE Controls when the unit will
sound the beeper
USINT Volume level of the beeper
ITIME Duration to show the batch
indicator on screen.
ITIME Duration to show the cycle
indicator on screen.
ITIME Duration to show the reject
indicator on screen.
USINT How the system handles
NOK results or rejects.
DT The current system time of
the device.
SHORT_STRING The name of the device
Service Name
Get_Attribute_Single Returns the contents of the specified attribute
Set_Attribute_Single Modifies a single attribute
80 of 110
Description of Attribute
Description of Attribute
Description of Service
Semantics of Value
1
Semantics of Value
Range: 1-12
Changing this value will
require all tools to be
reassociated.
Bit 0 – Beep on batch
Bit 1 – Beep on reject
Bit 2 – Beep on cycle
Range: 0-10
0 disables the beeper
If 0, the indicator does
not clear timeout.
Cannot be negative
If 0, the indicator does
not clear timeout.
Cannot be negative
If 0, the indicator does
not clear timeout.
Cannot be negative
0 – Ignore
1 – Display
2 – Report
3 – Count
Maximum length: 25
v1.6.0
20 January 2020