Table of Contents
Advertisement
Chapter 12: Product Specifications
Qualifier Placement
•
Mount the qualifier within 33ft of the tool during assembly.
•
Keep tool line of sight in view to the Qualifier. Metal, stone, glass, plaster and other
material will obstruct the wireless signal
•
Avoid channels used by other 2.4Ghz tools. Channel 1 is default in the qualifier
- Do a channel scan to choose the channel with the least interference. Page 42
Channels 1, 6 and 11 are the most commonly used on 2.4Ghz hardware.
•
Avoid mounting the qualifier on vibrating surfaces
•
Do not mount other equipment within 24-36" of the assembly qualifier
•
Be aware of interference from other devices such as microwaves, wireless barcode
readers, fluorescent lighting, power cables, garage door openers, walkie talkies, cordless
phones, wireless security hardware and Bluetooth devises that can interrupt the
wireless signal
EYFR03 User Manual
Chapter 12: Product Specifications
109 of 110
v1.6.0
20 January 2020
Advertisement
Table of Contents
