Task 14: Perform Initial DEFINITY AUDIX Administration
Task 14L: Check Alarm Status
This task is required for all installation scenarios.
1. With the cursor on the DEFINITY AUDIX command line, type display
alarms and press
The system displays the Alarm Report screen.
2. Check the ALARM TYPES fields for any active alarms — make sure that a
"y" (the default) appears in each of the alarm type fields and press
(F3) to display the active alarms.
3. If there are no active alarms (the screen will be blank), skip to Step 4.
Otherwise, resolve all active alarms. See DEFINITY AUDIX
System—Maintenance book, 585-300-110 for the procedures for
identifying and resolving the alarms.
4. Proceed to Task 14M: Check Hardware Status.
.
RETURN
Issue 2 December 1996
ENTER
3-27