Task 12: Activate Customer Options; Display Customer Options - Lucent Technologies DEFINITY AUDIX Installation And Upgrade

Initial System Administration

Task 12: Activate Customer Options

This task is required for all installation scenarios to check if customer options
have been activated and set to their limits. Use Worksheet C-1, Activate
Customer Options , when completing this screen.
Activating customer options is normally done before the system is shipped.
Complete the first section of this task, Display Customer Options , to see if the
settings on the System-Parameters Customer-Options screen are as specified on
Worksheet C-1.
If the settings are correct, proceed to Task 12: Activate Customer Options .
If the settings are not correct, complete the next section of this task, Display
Customer Options.

Display Customer Options

1. At the login prompt, enter craft. The system displays the Password
prompt.
2. Enter crftpw. The system displays the Enter terminal type prompt.
3. Enter one of the following:
4. Type display system-parameters customer options and press
3-4
Issue 2 December 1996
513 for a 513 BCT or 715 BCT; enter 513 also for a 610/615 BCT or
a PC with a 513 emulation package. (Since 513 is the default, you
can just press to select it.)
RETURN
4410 for a 4410 or 5410 terminal; enter 4410 also for a 610/615 BCT
or a PC with a 4410 emulation package.
4425 for a 4425 or 5425 terminal
5420 for a 5420 or 4415 terminal
g3-ma for a G3-MA
.
RETURN