Task 19: Perform Dial Tone Test For Ds Integrated Systems - Lucent Technologies DEFINITY AUDIX Installation And Upgrade

Acceptance Checks
Task 19: Perform Dial Tone Test for DS
Integrated Systems
If the system is using DS integration, continue, If the system is using CL
integration, skip this task.
Use the information on Worksheet B-1, Administering the Voice Ports as Stations.
1. If you have not already done so, log in to the switch administration
terminal.
2. In switch administration, with the cursor on the command line, enter
display feature-access-codes.
The system displays the Feature Access Codes screen.
3. Look for the Priority Calling Access Code field.
This is a multi-page screen, therefore you may need to look at more than
one page to find this field.
4. When you find the field, write down the priority calling access code value.
5. Exit the Feature Access Codes screen.
6. Log off of the switch administration terminal.
7. Return to the DEFINITY AUDIX system terminal.
8. From the command line, type busyout voice-group and press
The system responds with the Busyout/Release Voice Group screen.
4-6
Issue 2 December 1996
.
RETURN