Task 14F: Synchronize Definity Audix System And Switch Clocks - Lucent Technologies DEFINITY AUDIX Installation And Upgrade

Initial System Administration
4. Enter in the Call Answer Timeout field one of three possible ways a call is
to be handled when the timeout period (just established) expires:
5. Finally, enter in the extension field the number of the mailbox or extension
to which a call is to be transferred after it has timed out.
You may leave this field blank if you entered none in the previous step.
6. Press the
next task.
Task 14F: Synchronize DEFINITY AUDIX System
and Switch Clocks
This task is required for all installation scenarios.
NOTE:
The switch clock may not be set at this time. If it is not, set the switch clock
before performing this task. (See the appropriate switch document for the
procedure to set the switch clock.)
1. With the cursor on the DEFINITY AUDIX command line, type set time and
press
3-20
Issue 2 December 1996
Enter none if the call is simply to be disconnected.
Enter mailbox if the call is to be transferred to a mailbox.
Enter transfer if the call is to be transferred to an extension.
(F3) function key to save the changes and proceed to the
ENTER
.
RETURN