Task 27: Switch Names Audit (For Ds Integration Only); Task 28: Complete Initial Administration - Lucent Technologies DEFINITY AUDIX Installation And Upgrade

Initial Subscriber Administration
Task 27: Switch Names Audit (for DS
integration Only)
This task is required only if the DEFINITY AUDIX system will be running in DS integration.
1. Execute the audit switch-names command as described in Subtask 14K
(Run the Switch Names Audit) , in Chapter 3, ''Initial System Administration''
2. Execute the status audit and the display administration-log commands
as described in Task 17: Check the Status of the Switch Names Audit in
Chapter 3, ''Initial System Administration''.
3. Resolve any administration-log entries.
Task 28: Complete Initial
Administration
This task is required for all installation scenarios.
The DEFINITY AUDIX system administrator should complete the following steps.
Read Chapter 2 and Chapter 3 of DEFINITY AUDIX
System — Administration , 585-300-507.
Complete the initial administration tasks given in that book that apply to
the system being installed, for example:
— Recording automated attendant menus
— Recording customized announcements
— Changing system passwords
— Installing and administering the AUDIX Administration and Data
Inform your subscribers what to expect with their DEFINITY AUDIX system
service.
Copy and distribute any letters and user documents that your subscribers
need.
This is the end of all installation and initial administration tasks. The tasks in
Chapter 6, ''Customer Acceptance'' must be completed by the Project Manager.
5-4
Issue 2 December 1996
Acquisition Package (ADAP)