Task 4: Verify The Components And Connectivity - Lucent Technologies DEFINITY AUDIX Installation And Upgrade

Prerequisites
Task 4: Verify the Components and
Connectivity
Review the connectivity diagrams in Figure 1-1: DEFINITY AUDIX System
Connectivity Diagram — CL Integration, Figure 1-2: DEFINITY AUDIX System
Connectivity Diagram — DS Integration, and Figure 1-3: DEFINITY AUDIX LAN
Connectivity, on the following pages to gain a general understanding of how the
DEFINITY AUDIX system is to be connected.
In these drawings various optional connection methods are shown in coupling
brackets. For example, the brackets in Figure 1-1 include the several connection
methods mentioned under: ''Task 8: Install the Control-Link Cable'' on page 2-24
and subsequently described in detail. Likewise, the terminal wiring appropriate
to DS integration is explained at considerable length under: ''Task 7: Install the
Terminals'' on page 2-13.
Refer to the diagrams in the tasks just described for connectivity details.
Then compare the Price Element Code (PEC) and comcode list contained in
Chapter C with the actual parts you received to make sure that all the required
parts have been ordered and shipped correctly. In addition to the orderable
components listed in Appendix E, other terminals, modems, and printers are
supported and may be used in the DEFINITY AUDIX system configuration.
If you did not receive (or do not have on hand) all the required parts, follow your
normal claims procedure with the factory to acquire the missing parts. After you
have reviewed the connectivity diagram and have verified the DEFINITY AUDIX
system components, proceed to the tasks in Chapter 2, ''Hardware Installation''.
NOTE:
If DEFINITY AUDIX will be used as a server for Local Area Network (LAN)
applications such as I
the customer-provided LAN connection is available prior to installation of
the DEFINITY AUDIX.
1-4
Issue 2 December 1996
Message Manager, it is recommended that
NTUITY