Selection And Confirmation Of The Sewing Patterns; Combination Of The Work Clamp Foot And The Feed Plate - JUKI LK-1901AN Instruction Manual

4 . Selection and confirmation of the sewing patterns
WARNING :
In case of using an exclusive work clamp foot, make sure of the shape of the sewing pattern. If the
sewing pattern extends outside the work clamp foot, the needle interferes with the work clamp foot
during sewing, resulting in the danger of the needle breakage or the like.
) The patterns for the belt-loop attaching are from No. 7 to No. 22.
As for the way of operation for setting, checking or changing the sewing pattern, refer to the item
Operation of the sewing machine (basic)"
After setting, make sure of the needle entry point whether or not the needle interferes with
the work clamp foot.
* The calling has been set to ineffective at the time of delivery since the needle interferes with the
standard work clamp foot which has been provided with the machine. When using this function,
use "Setting the pattern data calling effective or ineffective" of the memory switch function to make
the calling effective. As for the way of operation for setting, refer to the item
memory switch" p.38
Pattern No.
Lengthwise
7
8
※ 9
※ 20
※ 2
※ 22
5 . Combination of the work clamp foot and the feed plate
WARNING :
In case of using an exclusive work clamp foot, make sure of the shape of the sewing pattern. If the
sewing pattern extends outside the work clamp foot, the needle interferes with the work clamp foot
during sewing, resulting in the danger of the needle breakage or the like.
Make use of the appropriate combination of the work clamp foot and the feed plate in accordance with the sewing
conditions. The combination for the standard delivery and the special order is shown in the following table.
Spec
LK-902AN
Standard
For large size
(Special order part)
For extra large size
(Special order part)
described in the instruction manual for the LK-900AN.
Sewing size (mm)
Crosswise
0 0
0 0
0 25
0 25
0 25
0 35
Feed plate
17
2
7
27
2.4
7
37
2.4
7
－
p.17 described in the instruction manual for the LK-900AN.
Sewing size is the dimension when
Number of stitches
the enlargement rate is 00%.
2
28
28
36
42
42
Part No.
3544465
Part No.
3545660
Part No.
35476
64
－
"!.[5]
"!.[8] How to use the
Work clamp foot
Part No.
10
443002
24.8
Part No.
2.8
3545504
27.4
Part No.
10
354580
37
Part No.
2.8
3547005
37.4